Kit

Item

Specification

Master Control

Kit

SMART ST20

Main unit, DC24V power supply, transistor output, supports pulse signals，12DI/8DO

AM03 (Analog Module) – 224XP built-in analog module

2 analog inputs, 1 analog output

DC24V Switching Power Supply (Rail-mounted Vertical Type)

MS-50W-24V, 2.5A, used for device

power supply

Circuit breaker 1P+N

Circuit breaker 1P+N，16A

PLC download cable

For Smart models, use a network cable; for 224XP, use a USB to PPI download cable

Indicator lamps (24V) ×4

Power supply: DC24V, four colors (red, green, yellow, blue)

Buzzer (24V) ×1

Power supply: DC24V, Red

Push button switch ×5

Self-reset red and green buttons

HMI

Touch Screen Kit

WEINVIEW (7 - inch)

Human Machine Interface (HMI), connected to PLC, used for displaying and controlling the operation status of PLC

HMI download cable

Used for downloading HMI programs, with a network port for Ethernet cable connection

HMI and PLC communication

cable

Used for communication connection between HMI

and PLC

HMI fixing bracket + screw pack

Fix the touchscreen with space reserved on the back for easy plugging and unplugging of wiring

Stepper Lead Screw Kit (1-axis)

Stepper motor driver

Stepper drive: 32 subdivisions, 4.0A pulse, DC24V

Stepper motor + Cable + Bracket

Stepper motor: 40A 2- phase 4- wire

Encoder (600P)

(Only one is equipped for multi - axis)

Incremental Optical Rotary Encoder

Encoder bracket

L- 55

Limit switches × 2 + Home switch × 1

2- micro switches, 1-proximity switch, 24V DC 2 - wire NO

Coupling +Hex wrench

Coupling: 5*8, M2.0 coupling and hex key wrench

Lead screw + Slide block + Flange nut + Scale ruler

T8 lead screw, flange nut, millimeter scale ruler

Analog Temperature Control PID Kit

Solid State Relay (SSR)

SSR - 40DA (40A) Single - phase

Temperature Transmitter

(0-10V)

Connect to PT100 sensor, measures temperature range 0-150°C, outputs 0-10V

PT100 (Industrial Grade)

PT100 Temperature Sensor Probe-Type Thermal Resistor; Temperature Sensing Range -20 to 350°C

Electric heater, integrally cast

Integrally cast and formed, powered by AC 220V, used for heating and PID experiments.

Frequency Inverter Kit

(1 Axis)

Delta frequency converter

(Delta is default; contact customer service for V20 model)

Power supply: AC220V, VFD-M model, supporting multi-segment speed control/analog speed regulation/communication control

Three-phase asynchronous motor

AC220V 6W

Frequency Inverter

Motor Bracket

Supporting Bracket for Three-Phase Asynchronous Motor

Relays × 3

DC24V, one set of (relay + base)

Communication network cable

Two wires are led out from RJ11 for connecting to the 485 communication of the frequency converter

Servo Kit

(Choose between 1 Axis and 6A)

Servo drive +Servo motor

3000 RPM, powered by AC220V, with encoder, accuracy 0.01mm

Servo motor

Servo motor

Power cable, 3 meters

Matched with the servo system

Encoder cable, 3 meters

Matched with the servo system

Pulse signal cable, 1 meter

Pulse signal cable for connecting to PLC

USB to 232 serial port cable

USB to 232 converter, applicable for communication between computer and servo system

Servo Motor Bracket

Motor Bracket

Communication Kit

Temperature and Humidity Communication Module

With 485 interface, supporting MODBUS RTU protocol, software debugging, and capable of reading environmental temperature and humidity

DB9 male and female connectors (Weld-free)

Weld-free connectors, which can be directly connected to PLC through DB9

USB to 485 converter

Connect to the computer's serial port debugging software to analyze data packets and protocols